LP425

Broadband Directional Antenna

400 MHz–3 GHz

Applications

  • Distributed Antenna Systems (DAS)
  • Cellular
  • Wi-Fi
  • Public Safety Bands

Features

Model LP425 is a directional antenna designed for transmitting and receiving wireless communications signals. The broadband characteristics of the log-periodic structure enable it to operate over a very wide frequency range with constant gain. Innovative design and manufacturing techniques result in long-lasting strength and performance.

The antenna boom is made from a custom aluminum extrusion that reduces the number of mechanical RF junctions. The use of similar metal alloys keeps PIM (Passive Intermodulation) to a minimum. Dipole elements are permanently attached to the boom by a technique that maintains excellent electrical characteristics for the life of the antenna. Theresult is a stronger, more stable feedpoint with alow VSWR.

The antenna includes a universal mounting bracket for easy installation. An optional radome cover (UL94VO flame rated) is offered for added protection. An optional powdercoat finish with UV inhibitors is recommended for use in outdoor environments.

SPEC SHEET
REQUEST A SALES CALL

Specifications

FREQUENCY RANGE 400 MHz–3 GHz
GAIN 7 dBi typical
IMPEDANCE 50 ohms nominal
VSWR < 2:1
CONNECTOR Type N female
POLARIZATION Linear
POWER 200 watts CW max.
SIZE (L x W x H) 48 x 41 x 18 cm, 19 x 16 x 7 in.
WEIGHT 2 lb. (1 kg)
FINISH Gold iridite
OPTIONS
  • Radome Cover (add suffix R)
  • Powder-coat finish (add suffix P)
  • 7-16 DIN, 4.3-10 connectors

LP425PCB

Broadband Directional Antenna

400 MHz–3 GHz

Applications

  • Distributed Antenna Systems (DAS)
  • Cellular
  • Wi-Fi
  • Public Safety Bands
SPEC SHEET
REQUEST A SALES CALL

Features

Model LP425PCB is a low profile directional antenna designed for transmitting and receiving wireless communications signals. The broadband characteristics of the enclosed antenna structure enable it to operate over a very wide frequency range with constant gain. Innovative design and manufacturing techniques result in long-lasting strength and performance. The antenna is etched onto a low-loss microwave substrate material and mounted in a weather-resistant housing that is only 1/2” thick. There are four mounting holes for installation onto any flat non-conductive surface, such as an office wall or ceiling. Contact the factory for information on mounting to concrete or other surfaces.

Specifications

FREQUENCY RANGE 400 MHz–3 GHz
GAIN 5.5 dBi typical
BEAMWIDTH See figure at right
IMPEDANCE 50 ohms nominal
VSWR < 2:1
CONNECTOR Type N female
POLARIZATION Linear
INPUT POWER 25 watts CW
SIZE (L x W x H) 39.4 x 29.2 x 1.27 cm, 15.5 x 11.5 x .5 in.
PIGTAIL LENGTH 8 in.
WEIGHT 2 lb. (0.7 kg)
COVER UL94VO flame rated
STANDARD COLOR Polar White
OPTIONS
  • Custom pigtail length
  • Mounting brackets
  • 7-16 DIN, 4.3-10 connectors
  • PIM rated option
  • Individual PIM testing
  • Protective tray and cover

Options

Protective Tray and Cover Option

A mounting tray and cover are available for installations where extra protection of the antenna is required. The tray and cover are made from high impact strength polycarbonate. The antenna is preinstalled in the tray, with DIN connector accessible for external connection. Protective Cover shown below, outside view left, with antenna installed, right. Dimensions of tray and flat cover are shown below.

LP425PCB-O-DIN

Broadband Directional Antenna

400 MHz–3 GHz

Applications

  • Distributed Antenna Systems (DAS)
  • Cellular
  • Wi-Fi
  • Public Safety Bands

Features

Model LP425PCB-O-DIN is a low profile directional antenna designed for transmitting and receiving wireless communications signals. The broadband characteristics of the enclosed antenna structure enable it to operate over a very wide frequency range with constant gain. Innovative design and manufacturing techniques result in long-lasting strength and performance. -O for outdoor rated.

The antenna is etched onto a low-loss microwave substrate material and mounted in a weather-resistant housing that is only 1/2” thick. There are four mounting holes for installation onto any flat non-conductive surface, such as an office wall or ceiling. Contact the factory for information on mounting to concrete or other surfaces.

SPEC SHEET
REQUEST A SALES CALL

Specifications

FREQUENCY RANGE 400 MHz-3 GHz
GAIN 5.5 dBi typical
BEAMWIDTH See figure at right
IMPEDANCE 50 ohms nominal
VSWR < 2:1
CONNECTOR DIN female
POLARIZATION Linear
INPUT POWER 25 watts CW
SIZE (L x W x H) 39.4 x 29.2 x 1.27 cm, 15.5 x 11.5 x .5 in.
PIGTAIL LENGTH 8 in.
WEIGHT 2 lb. (0.7 kg)
COVER UL94VO flame rated
STANDARD COLOR Polar White
OPTIONS
  • Custom pigtail length
  • Custom covers and colors
  • Mounting brackets

LP460PCB

Broadband Directional Antenna

400 MHz–6 GHz

Applications

  • Distributed Antenna Systems (DAS)
  • Cellular
  • WiFi
  • Public Safety Bands

Features

Model LP460PCB is a low profile directional antenna designed for transmitting and receiving wireless communications signals. The broadband characteristics of the log-periodic structure enable it to operate over a very wide frequency range with constant gain. Innovative design and manufacturing techniques result in long-lasting strength and performance. The antenna is etched onto a low-loss microwave substrate material. Dielectric and reactive loading of the antenna elements reduces the overall size of the structure. The antenna is mounted in a protective housing that is only 1 cm thick. There are four mounting holes for installation onto any flat nonconductive surface, such as an office wall or ceiling.

SPEC SHEET
REQUEST A SALES CALL

Specifications

FREQUENCY RANGE 400 MHz-6 GHz
GAIN 5-6 dBi typical
IMPEDANCE 50 ohms nominal
VSWR < 2:1
CONNECTOR Type N female
PIGTAIL RG-316
POLARIZATION Linear
INPUT POWER 25 watts CW
SIZE (L x W x H) 36 x 25 x 1 cm, 14 x 10 x .375 in.
WEIGHT 1.5 lb. (0.7 kg)
COVER UL94VO flame rated Kydex

LP6530PCB

Broadband Directional Antenna

650 MHz–3 GHz

Applications

  • Distributed Antenna Systems (DAS)
  • Cellular
  • WiFi
  • Public Safety Bands

Features

Model LP6530PCB is a low profile directional antenna designed for transmitting and receiving wireless communications signals. The broadband characteristics of the enclosed antenna structure enable it to operate over a very wide frequency range with constant gain. Innovative design and manufacturing techniques result in long-lasting strength and performance. The antenna is etched onto a low-loss microwave substrate material and mounted in a weather-resistant housing that is only 1/2” thick. There are four mounting holes for installation onto any flat non-conductive surface, such as an office wall or ceiling. Contact the factory for information on mounting to concrete or other surfaces.

SPEC SHEET
REQUEST A SALES CALL

Specifications

FREQUENCY RANGE 650 MHz-3 GHz
GAIN 7 dBi typical
BEAMWIDTH See figure at right
IMPEDANCE 50 ohms nominal
VSWR < 1.5:1
CONNECTOR Type N female
POLARIZATION Linear
INPUT POWER 25 watts CW
SIZE (L x W x H) 39.4 x 29.2 x 1.27 cm, 15.5 x 11.5 x .5 in.
PIGTAIL LENGTH 8 in.
WEIGHT 2 lb. (0.7 kg)
COVER UL94VO flame rated
STANDARD COLOR Polar White
OPTIONS
  • Custom pigtail length
  • Mounting brackets
  • 7-16 DIN, 4.3-10 connectors
  • PIM rated option
  • Individual PIM testing
  • Protective tray and cover

Options

Protective Tray and Cover Option

A mounting tray and cover are available for installations where extra protection of the antenna is required. The tray and cover are made from high impact strength polycarbonate. The antenna is preinstalled in the tray, with DIN connector accessible for external connection. Protective Cover shown below, outside view left, with antenna installed, right. Dimensions of tray and flat cover are shown below.

LP6560PCB

Broadband Directional Antenna

650 MHz–6 GHz

Applications

  • Distributed Antenna Systems (DAS)
  • Cellular
  • WiFi
  • Public Safety Bands

Features

Model LP6560PCB is a low profile directional antenna designed for transmitting and receiving wireless communications signals. The broadband characteristics of the enclosed antenna structure enable it to operate over a very wide frequency range with constant gain. Innovative design and manufacturing techniques result in long-lasting strength and performance.

The antenna is etched onto a low-loss microwave substrate material and mounted in a weather-resistant housing that is only 1/2” thick. There are four mounting holes for installation onto any flat non-conductive surface, such as an office wall or ceiling. Contact the factory for information on mounting to concrete or other surfaces.

SPEC SHEET
REQUEST A SALES CALL

Specifications

FREQUENCY RANGE 650 MHz-6 GHz
GAIN 6 dBi typical (see table)
BEAMWIDTH See figure at right
IMPEDANCE 50 ohms nominal
VSWR < 1.5:1
CONNECTOR Type N female
POLARIZATION Linear
INPUT POWER 15 watts CW
SIZE (L x W x H) 39.4 x 29.2 x 1.27 cm, 15.5 x 11.5 x .5 in.
OPERATING TEMPARATURE -30°F to 150°F
WEIGHT 2 lb. (0.7 kg)
COVER UL94VO flame rated Kydex
STANDARD COLOR Polar White
INGRESS PROTECTION IP66
OPTIONS
  • Custom pigtail length
  • Mounting brackets
  • 7-16 DIN, 4.3-10 connectors
  • PIM rated option
  • Individual PIM testing
  • Protective tray and cover

Options

Protective Tray and Cover Option

A mounting tray and cover are available for installations where extra protection of the antenna is required. The tray and cover are made from high impact strength polycarbonate. The antenna is preinstalled in the tray, with DIN connector accessible for external connection. Protective Cover shown below, outside view left, with antenna installed, right. Dimensions of tray and flat cover are shown below.

REQUEST A SALES CALL