Log-Periodic EMC Antennas

30 MHz – 6 GHz

Applications

  • Radiated Emissions
  • Radiated Immunity
  • Pre-Scan/Full Compliance

Features

SunAR RF Motion antennas feature an innovative design philosophy that makes them the practical choice for EMC testing. New manufacturing techniques that simplify assembly and minimize the use of hardware, create an electrically stable measuring instrument that stays in calibration and holds up to the environment.

SunAR RF Motion log-periodic antenna booms are made from a custom aluminum extrusion that reduces the number of parts at the front of the antenna, resulting in a stronger, more stable feedpoint. The unique shape allows for a larger feed cable to be used, which significantly increases the maximum power rating. Dipole elements are permanently attached to the boom by a construction technique that maintains excellent electrical characteristics for the life of the antenna. A tough powdercoat finish with UV inhibitors seals the aluminum structure and protects it from sunlight and moisture.

 

Optional A2LA accredited calibration is available. Add CC suffix to model. 

Log-Periodic Antennas – 200 MHz – 2, 3, 6 GHz

LP1 2 GHz
LP3 3 GHz
LP6 6 GHz

Specifications

GAIN 6 dBi typical
IMPEDANCE 50 ohms nominal
CONNECTOR Type N female
VSWR 2:1 max.
POLARIZATION Linear
MAX POWER 300 watts cw
SIZE (LxWxH) 48 x 3 x 29.5 in, 122 x 8 x 75 cm
WEIGHT 5 lb. (2 kg)
MOUNTING TUBE 22 mm dia. stainless steel
FINISH Orange powdercoat

MOUNTING

All SunAR RF Motion antennas have a 22 mm diameter stainless steel rear mounting tube. This configuration enables polarization changes without physical displacement of the antenna, and minimizes the effect of the RF cable by keeping it well behind the antenna elements. The SunAR RF Motion SNAP! mount provides a secure interface to most antenna positioning towers. It locks the antenna in place, prevents unwanted rotation and facilitates rapid antenna changes.

EMC ANTENNA OPTIONS

  • Tripod
  • Tripod mount
  • SNAP! mount
  • Carrying case

LP60

Directional Antennas

400 MHz–6 GHz

Applications

  • EMC and Wireless testing
  • Site survey
  • In situ testing

Features

Our low-profile directional antennas are designed for EMC and wireless testing applications from 400 MHz to 6 GHz and beyond. These antennas are etched on a low-loss microwave substrate. The broadband, log-periodic structure enables operation over a very wide frequency range with constant gain. Innovative design and manufacturing techniques result in long-lasting performance.

A stainless steel rear mounting tube aids in mounting and handling. An optional Polarization Mount (pictured) is available for use with a tripod or permanent fixture. Kits available.

Model Frequency Range Typical Gain
LP430 400 MHz-3 GHz 5 dBi
LP460 400 MHz-6 GHz 5 dBi
LP6530 650 MHz-3 GHz 7dBi
LP760 700 MHz-6 GHz 6 dBi
LP60 1.3-6 GHz 6 dBi

Specifications

FREQUENCY/GAIN: See below
IMPEDANCE 50 ohms nominal
VSWR < 2:1
CONNECTOR Type SMA female
POLARIZATION Linear
CROSS POLARIZATION 20 dB
F/B RATIO 20 dB
POWER 10 watts CW maximum
MOUNTING TUBE 1/2” in. stainless steel
FINISH Powder-coat
OPTIONS
  • Polarization mount
  • Individual calibration
  • Custom frequencies

LP80, LP100

Directional Antennas

80 MHz–3 GHz
100 MHz–3 GHz

Applications

  • EMC Radiated Emissions
  • EMC Radiated Immunity
  • Signal monitoring and detection

Features

Model LP80 & LP100 are directional antennas designed for transmitting and receiving RF signals from 80 or 100MHz to 3GHz. The broadband characteristics of the log-periodic structure enable it to operate with a nearly constant gain and radiation pattern over the entire frequency range.

Innovative design and manufacturing techniques result in long-lasting strength and performance. The antenna boom is made from a custom aluminum extrusion that reduces the number of mechanical RF junctions. Dipole elements are attached to the boom by a technique that maintains excellent electrical characteristics for the life of the antenna. A tough powdercoat finish with UV inhibitors seals the aluminum structure and protects it from sunlight and moisture.

The LP80 & LP100 have a rear tube that allows polarization adjustments without changing antenna height. This also minimizes the effect of the RF cable by keeping it well behind the antenna elements. The SNAP! mount provides a secure interface to antenna positioning towers. It locks the antenna in place and prevents unwanted rotation during polarization changes.

Specifications

FREQUENCY RANGE 80 or 100 MHz – 3 GHz
GAIN 6 dBi typical
IMPEDANCE 50 ohms nominal
VSWR < 2:1
CONNECTOR Type N female
POLARIZATION Linear
INPUT POWER See curve below
LP80 SIZE (L x W) 94 x 75 in., 238 x 191 cm
LP100 SIZE (L x W) 82 x 60 in., 208 x 152 cm
WEIGHT LP 80: 21 lb., 10 kg; LP100: 15 lb., 7 kg
MOUNTING TUBE 22 mm stainless steel
FINISH Powder-coat
OPTIONS
  • Individual calibration
  • SNAP! mount
  • Tripod
  • Center Mount (reduces overall length)

HC1

Antenna Shipping and Carrying Case

Features

  • Small Pad-Lockable
  • Case meets the Airline Transport Association (A.T.A.) specifications for durability of reusable shipping containers
  • All Recessed hardware
  • Foam Lined
  • Recessed Handle
  • Dimensions: 45 in. x 34 in. x 12 in.
  • Maintenance Free

Custom Designs Available! Request a Sales Call Below.